挖掘机配件履带板日常保养小常识

挖掘机履带板是工程机械底盘件之一, 是旧工程机械易损件. 轨道板两端有孔, 与驱动轮啮合, 和中间的感应齿, 用于调节轨道, 防止挖掘机转弯或倾斜时履带脱落. 在与地面接触的一侧, 有加强防滑筋 (称为模式), in order to improve the robustness of the digger track shoe and the adhesion between the track and the ground.

Often used in excavators, 推土机, crawler cranes, pavers and other construction machinery. Excavator as construction machinery, daily maintenance is very important. In fact, 只要你花一点时间进行适当的保养, you can avoid big moves in the future. In order to save the maintenance funds and avoid the loss caused by the delay caused by the overhaul of the machine, the dig brother will share with you the daily maintenance of the PC300-5 excavator track plate.
首先, in the process of driving the excavator, it is necessary to avoid repeatedly walking on the inclined ground and suddenly turning for a long time, which will make the side of the chain and the side of the driving wheel and the guiding wheel meet, thus increasing the degree of wear. Straight travel and wide turns can effectively prevent wear and tear.

而且, if part of the CAT E312 excavator sprocket and the support wheel can not run under the state of continued use, it may lead to roller wear, but also may cause the wear of the chain joint. If a roller that does not work is found, it must be repaired immediately.

There is the carrier installation bolt, CAT E120 excavator track roller, track plate bolt, walking pipe bolt, sprocket installation bolt, because the excavation long time after work is easy to loose because of vibration, if continue to run in this case, may lead to the gap between the track plate and the bolt, and then lead to the digger track shoe cracks. 所以, regular inspection of bolts and nuts for firmness can reduce unnecessary maintenance costs.